 |
| Samsung Galaxy S6 Edge S6 Edge Price , Review , Full Specs |
Download Mode is a state your phone can be in that allows you to flash firmware through Odin or other desktop software.
When in Download Mode, you will see a triangle with an Android image in it and it says "Downloading..."
If you are stuck on the 'Downloading..." screen, you can just remove and re-insert the battery then power the phone back on.
If you are flashing firmware while in download mode, then you unplug it or remove the battery, your phone probably won't turn on any more.
Download Mode is essentially the same as Bootloader Mode.
How To Access Download Mode for J1 :
4 Ways to do access download mode for
1-Button Combo
First of all, turn off your phone; you can either press once on power button and select “power off” or you can press and hold the power key for a few seconds.2-Reboot Application (requires root See here guide for rooting Galaxy J1)
Next, initiate the reboot sequence by pressing and holding (at the same time) the power, volume down and home buttons.
Release the keys when download mode is displayed on your Galaxy S6.
3-USB Jig
4-CMD/Terminal
a-Install ADB
b-You must have USB Drivers installed for your device.
c-Enable USB Debugging on your device and plug it into your computer via USB cable.
d-Open CMD (windows) or Terminal (linux/mac). To open CMD, hold windows key, then press R, then type cmd.exe and press enter.
e-Type adb reboot download
Source : Rooter15 , jakar , android.gs