Quantcast
Channel: Rooter 15
Viewing all 222 articles
Browse latest View live

How to install Custom Recovery for Samsung Galaxy Ace Advance

$
0
0
Galaxy Ace Advance Logo
Review , Price , Full Specs
Prerequisites :

You have to backup your data first like contacts , calls , massages , apps ,
1-You have installed your Ace Advance USB drivers on your PC (Find it here ).
2-You need to enable USB debugging mode which is deactivated by default. (you can skip it )
3-Your Ace Advance should have 70-80% charge remaining.
4-Your Ace Advance should be factory unlocked. (for locked phone, flash carrier firmware to stay on warranty)
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt. 
6-Make sure that kies program is not running & disable antivirus.

Downloads :


CWM Recovery Img

Samsung Usb Drivers
Odin flash tool


Flashing 
Samsung Ace Galaxy Advance Recovery  :


1.You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2.Then you must install all driver or Samsung smart switch to your computer or PC.
3.Extraxt Odin V3.10.6. file on the destination folder.
4.Download Recovery file
5.Switch Off your Galaxy Note 2 to start flashing process.
6.Then, you must run Odin3 v3.10.6 by right click on Odin.exe and select Run as Administrator.
7.When program is running, now you can click AP, and navigate to the Recovery file.
8.Now your Recovery file has been inserted in Odin3
9.Then, Enter download mode your 
Ace Advance

http://rooter15.blogspot.com/2016/01/download-mode-for-samsung-galaxy-ace.html
10.Connect your Ace Advance to pc or laptop With usb
11.Start downloading and wait until it's says it's done

How To Resolve "not registered on network" Error on Galaxy Smartphone?

$
0
0

Introduction :

First you need to find out what is the reason behind this "not registered on network" error coming out of your Samsung Galaxy Smartphone. Points to be noted are given below along with their solutions

How to resolve not registered on network :

1. Please check whether you have installed any new firmware on your Samsung Galaxy Smartphone. If did then the installed firmware may have been the wrong one You can find your Stock Firmware by searching at Samfirmware.com, this can be a cause of "not registered on network" error.

To resolve this please find the correct Stock ROM (firmware) for your Galaxy Smartphone and install it using Odin.

Replay here if you want to know how to do that for your phone by telling your phone model

If that is not the case then kindly go on reading.

2. Please check whether you have recently rooted your Galaxy Smartphone. If did, again the solution is same please install it with Stock ROM (firmware).

3. If you are still not able to find the cause then kindly check whether you have installed any custom ROM on your Galaxy Smartphone. In that case also please install it with Stock ROM (firmware).

You can try installing another firmware if after installing a particular firmware doesn't solve your issue (like a trial and error method).

If none of the above solutions or causes are not concerning you then please do the below steps to resolve/fix "not registered on network" error coming out of your Samsung Galaxy Smartphone.

1. Please go to 
Settings->Wireless and networks->Mobile Networks->Network mode there select "WCDMA only".

2. Now restart your device and go back to 
Settings->Wireless and networks->Mobile Networks->select your Network Operator. Select the correct network operator and check whether your issue is resolved
If the issue is still there then please change the Network mode to "GSM Only" and check whether the issue is resolved.

I am 100% sure that any of the above steps will help you to resolve your issue. If it doesn't then it's a hardware complaint which can be resolved through physical repair only.

This method is compatible on all Samsung Galaxy Smartphones like 


Samsung Galaxy S6, Samsung Galaxy S6 Edge, Samsung Galaxy Note Edge, Samsung Galaxy Note 3 (N9006), Samsung Galaxy Note (i9220), Samsung Galaxy Note II (N7100), Samsung Mesmerize i500, Samsung Galaxy S3 i535, Samsung Galaxy Trend SCH-i699, Samsung Galaxy S2 i777, Samsung i879, Samsung Galaxy S3 i939, Samsung Galaxy S4 i959, Samsung Galaxy S i9000, Samsung Galaxy S i9001, Samsung Galaxy S2 i9100, Samsung Galaxy S2 i9105, Samsung Galaxy S2 i9152, Samsung Galaxy S3 i9300, Samsung Galaxy S3 i9308, Samsung Galaxy Ace S5830, Samsung Galaxy Gio S5660, Samsung Galaxy S4 i9500, Samsung Galaxy S Duos S7562, Samsung Galaxy S Vibrant T959 (T-Mobile), Samsung Galaxy S5 (SM-G900H, SM-G900R4, SM-G900V), Samsung Galaxy Note 3 Neo (SM-N7500, SM-N7502, SM-N7505), Samsung Galaxy Grand Neo (GT-I9060), Samsung Galaxy Win Pro (SM-G3812), Samsung Galaxy S Duos 2 (GT-S7582), Samsung Galaxy Trend Plus (GT-S7580), Samsung Galaxy Grand 2 (SM-G7100)SM-G7102 (Dual SIM), Samsung Galaxy Star Pro (GT-S7260)GT-S7262 (Dual SIM), Samsung Galaxy Express 2 (SM-G3815), Samsung Galaxy Round (SM-G9105), Samsung Galaxy Trend Lite (GT-S7390)GT-S7392 (Dual SIM), Samsung Galaxy Light (SGH-T399), Samsung Galaxy Core Plus (SM-G3500)SM-G3502 (Dual SIM), Samsung Galaxy Ace 3 (GT-S7270)[8]GT-S7272 (Dual SIM), GT-S7275 (LTE), Samsung Galaxy Note 3 (SM-N9000, SM-N9002, SM-N9005), Samsung Galaxy S4Mini (GT-I9190)[10]Galaxy S4 Mini I9195 (LTE), Galaxy S4 Mini I9192 (Dual SIM), Samsung Galaxy S4 Active (GT-I9295), Samsung Galaxy S4 Zoom (SM-C1010), Samsung Galaxy Pocket Neo (GT-S5310)GT-S5312 (Dual SIM), Samsung Galaxy Star ((GT-S5280)GT-S5282 (Dual SIM), GT-S5283 (Triple SIM)), Samsung Galaxy Core (GT-S8262)GT-i8262D, Samsung Galaxy Y Plus (GT-S5303), Samsung Galaxy Win (GT-I8550)Galaxy Grand Quattro (GT-I8552), Samsung Galaxy Mega (GT-I9150, GT-I9152, GT-I9200, GT-I9205), Samsung Galaxy Fame (GT-S6810, GT-S6810P), Samsung Galaxy S4 (GT-I9500, GT-I9505, GT-I9506), Samsung Galaxy Xcover 2 (GT-S7710), Samsung Galaxy Young (GT-S6310, GT-S6312), Samsung Galaxy Grand (GT-I9080, GT-I9082), Samsung Galaxy S II Plus (GT-I9105), Samsung Galaxy Pocket Plus (GT-S5301), Samsung Galaxy S III Mini (GT-I8190), Samsung Galaxy Rugby Pro (SGH-I547), Samsung Galaxy Rugby LTE (SGH-i547C, Canadian ket), Samsung Galaxy ExpressSGH-I437, Samsung Galaxy Rush, Samsung Galaxy Note II, Samsung Galaxy Reverb, Samsung Galaxy Victory 4G LTE (SPH-L300), Samsung Galaxy Pocket Duos (GT-S5302), Samsung Galaxy S Duos (GT-S7562), Galaxy S Duos (GT-S7568), Galaxy Trend II Duos (GT-S7572), Galaxy Trend (S7560M), Samsung Galaxy Stellar (SCH-I200), Samsung Galaxy Ch@t (GT-B5330), Samsung Galaxy Appeal (SGH-I827), Samsung Galaxy S III (GT-I9300), Galaxy S III I9305, Samsung Galaxy S Advance, Galaxy S II Lite, Samsung Galaxy Rugby (GT-S5690M), Samsung Galaxy Pocket (GT-S5300), Samsung Galaxy Rugby St (SGH-i847), Samsung Galaxy Beam (i8530), Samsung Galaxy Y DUOS (GT-S6102), Samsung Galaxy Mini 2 (GT-S6500), Samsung Galaxy Ace 2 (GT-I8160), Samsung Galaxy Ace 2 x (GT-S7560M), Samsung Galaxy Ace Plus (GT-S7500), Samsung Galaxy Y Pro Duos (GT-B5510, GT-B5512), Samsung Galaxy Nexus (i9250), Samsung Galaxy Note, Samsung Stratosphere, Samsung Galaxy XCover (S5690), Samsung Galaxy Precedent, Samsung Galaxy Y (GT-S5360), Samsung Galaxy M, Samsung Galaxy W (I8150), Samsung Exhibit II 4G (SGH-T679), , Samsung Galaxy R (I9103), Samsung Galaxy S Plus (GT-i9001), Samsung Galaxy Z, Samsung Exhibit 4G (SGH-T759), Samsung Galaxy S II (GT-I9100), Samsung Galaxy S II Skyrocket, Samsung Captivate Glide, Samsung Galaxy Neo, Samsung Galaxy Pro, Samsung Galaxy Prevail (SPH-M820), Samsung Galaxy Mini (GT-S5570), Samsung Galaxy Next, Samsung Galaxy Pop, Samsung Galaxy Gio (GT-S5660), Samsung Galaxy SL (GT-I9003), Samsung Galaxy Fit (S5670), Samsung Galaxy Ace (GT-S5830, GT-S5830i)[42]Samsung Galaxy Cooper (GT-S5830), Samsung Galaxy K[44], Samsung Galaxy 551, Samsung Galaxy U, Samsung Galaxy 5, Samsung Galaxy Europa, Samsung Galaxy 550, Samsung Galaxy 3Samsung Galaxy Apollo, Samsung Galaxy S (GT-I9000), Samsung Captivate, Samsung Vibrant, Samsung Fascinate,Samsung Epic 4G, Samsung Mesmeriz, Samsung Galaxy Spica GT-I5700 and Samsung Galaxy Portal.
Source : Rooter15 , Websearch 

Successful Android system revenue $22 billion in 2016

Android 6.0 marshmallow Coming To Some Sony Xperia Models

How to rotate your screen for everything on Android

$
0
0

Prerequisites :

-You have to update to lateast Android firmware "marshmallow"
-you have to download Google now launcher .

How to rotate your screen :

Make sure you have auto-rotate flipped on in the Accessibility section and in the Google Now Launcher if you’re using that on your home screen.
Then touch Allow rotation to ensure that the feature is enabled. This is allow rotation of only the home screen, and only if you're using the Google launcher (other custom launchers that come with your phone may or may not have a similar function).
To allow apps to rotate the screen according to the orientation of your device, or stop them from rotating if you find them turning around while you lie in bed with your phone, go to Settings > Accessibility and turn on Auto-rotate screen. This is on by default on most phones.

You may notice a screen rotation lock button in the quick settings of your phone, too. Swipe down from the top of the screen to check.

Source : rooter15 , greenbot

How to root Samsung Galaxy J1 (2016)

$
0
0
Samsung Galaxy J1 (2016) Logo
Review , Full Specs
Prerequisites :

-Before doing anything you have to backup your Samsung Galaxy J1 Data See this guide here

1-You need to enable USB debugging mode which is deactivated by default. (you can skip it )
2-Your J1 should have 70-80% charge remaining.

Downloads :


Step By Step Root For Galaxy J1 :

1-Download and install Towelroot App
2-Follow app instructions 
3-Wait until it's done and phone will restart
4-Check Root access with root checker .

Download Mode For Samsung Galaxy J1

$
0
0
Samsung Galaxy J1 (2016) Logo
Review , Price , Full Specs
About Download Mode:

Download Mode is a state your phone can be in that allows you to flash firmware through Odin or other desktop software.
When in Download Mode, you will see a triangle with an Android image in it and it says "Downloading..."
If you are stuck on the 'Downloading..." screen, you can just remove and re-insert the battery then power the phone back on.
If you are flashing firmware while in download mode, then you unplug it or remove the battery, your phone probably won't turn on any more.
Download Mode is essentially the same as Bootloader Mode.

How To Access Download Mode for Galaxy J1 :

4 Ways to do access download mode for

1-Button Combo
Switch off your device.
In the next step hold down the Power key.
After a 2 seconds, while holding the Power key press and hold the Volume Up + Home button for a few seconds.
You should see a Recovery mode menu.
You can use Volume buttons to scroll, and select options with Power button.
2-Reboot Application (requires root See here guide for rooting Galaxy J1)

3-USB Jig 

4-CMD/Terminal

a-Install  ADB
b-You must have USB Drivers installed for your device.
c-Enable USB Debugging on your device and plug it into your computer via USB cable.
d-Open CMD (windows) or Terminal (linux/mac). To open CMD, hold windows key, then press R, then type cmd.exe and press enter.
e-Type adb reboot download

Source : Rooter15 jakar , compntech

How to install Stock Rom For Samsung Galaxy J1 (2016)

$
0
0
Samsung Galaxy J1 (2016) Logo
Review , Price , Full Specs
Why you need to installStock rom :

Some time you need to fix some thing with your device , Like Rooting your device , when you install custom rom or custom recovery , And it cause a harm to your device , Or you want to downgrade from a higher version of your system to Stock one ,

Prerequisites :

You have to backup your data first like contacts , calls , massages , apps ,
1-You have installed your Galaxy J1 (2016) USB drivers on your PC (Find it here ).
2-You need to enable USB debugging mode which is deactivated by default. (you can skip it )
3-Your Galaxy J1 (2016) should have 70-80% charge remaining.
4-Your Galaxy J1 (2016) should be factory unlocked. (for locked phone, flash carrier firmware to stay on warranty)
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt. 
6-Make sure that kies program is not running & disable antivirus.

Downloads :

-Go to 
http://www.sammobile.com/firmwares Then Type your exact phone model to download
You can see your J1 Model by going to settings > About 
-Samsung Usb Drivers
-Odin flash tool

Flashing Samsung Galaxy J1 (2016) Stock rom :

1.You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2.Then you must install all driver or Samsung smart switch to your computer or PC.
3.Extraxt Odin V3.10.6. file on the destination folder.
4.Download Stock rom file
5.Switch Off your Galaxy J1 (2016) to start flashing process.
6.Then, you must run Odin3 v3.10.6 by right click on Odin.exe and select Run as Administrator.
7.When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
8.Now your firmware file has been inserted in Odin3
9.Then, Enter download mode your Galaxy J1 (2016)

http://rooter15.blogspot.com/2016/01/download-mode-for-samsung-galaxy-j1.html

10.Connect your Galaxy J1 (2016) to PC or laptop With USB
11.Start downloading and wait until it's says it's done



Download Mode For Samsung Galaxy A7 ِAnd And A7 Duos

$
0
0
Samsung Galaxy A7 Logo
Review , Price , And Full Specs
About Download Mode:

Download Mode is a state your phone can be in that allows you to flash firmware through Odin or other desktop software.
When in Download Mode, you will see a triangle with an Android image in it and it says "Downloading..."
If you are stuck on the 'Downloading..." screen, you can just remove and re-insert the battery then power the phone back on.
If you are flashing firmware while in download mode, then you unplug it or remove the battery, your phone probably won't turn on any more.
Download Mode is essentially the same as Bootloader Mode.

How To Access Download Mode for Galaxy A7 :

4 Ways to do access download mode for

1-Button Combo
Power off phone , then press and hold volume down + home button + Power on , When phone power on confirm to enter download mode by pressing volume up
2-Reboot Application (requires root See here guide for rooting Galaxy J1)

3-USB Jig 

4-CMD/Terminal

a-Install  ADB
b-You must have USB Drivers installed for your device.
c-Enable USB Debugging on your device and plug it into your computer via USB cable.
d-Open CMD (windows) or Terminal (linux/mac). To open CMD, hold windows key, then press R, then type cmd.exe and press enter.
e-Type adb reboot download

Source : Rooter15 jakar , hard-reset

How to install Stock Rom For Samsung Galaxy A7 And A7 Duos

$
0
0
Samsung Galaxy A7 Logo
Review , Price , And Full Specs
Why you need to install Stock rom :

Some time you need to fix some thing with your device , Like Rooting your device , when you install custom rom or custom recovery , And it cause a harm to your device , Or you want to downgrade from a higher version of your system to Stock one ,

Prerequisites :

You have to backup your data first like contacts , calls , massages , apps ,
1-You have installed your Galaxy A7 USB drivers on your PC (Find it here ).
2-You need to enable USB debugging mode which is deactivated by default. (you can skip it )
3-Your Galaxy A7 should have 70-80% charge remaining.
4-Your Galaxy A7 should be factory unlocked. (for locked phone, flash carrier firmware to stay on warranty)
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt. 
6-Make sure that kies program is not running & disable antivirus.

Downloads :

-Go to 
http://www.sammobile.com/firmwares Then Type your exact phone model to download
You can see your A7 Model by going to settings > About 
-Samsung Usb Drivers
-Odin flash tool

Flashing Samsung Galaxy A7 Stock rom :

1.You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2.Then you must install all driver or Samsung smart switch to your computer or PC.
3.Extraxt Odin V3.10.6. file on the destination folder.
4.Download Stock rom file
5.Switch Off your Galaxy A7 to start flashing process.
6.Then, you must run Odin3 v3.10.6 by right click on Odin.exe and select Run as Administrator.
7.When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
8.Now your firmware file has been inserted in Odin3
9.Then, Enter download mode your Galaxy A7 (2016)
http://rooter15.blogspot.com/2016/01/download-mode-for-samsung-galaxy-a7-and.html
10.Connect your Galaxy A7 to PC or laptop With USB
11.Start downloading and wait until it's says it's done

LUM Microsoft releases new Lumia 550 windows 10 firmware update

$
0
0

You can update Lumia 550 to windows 10 by update is reportedly only available through the Windows Device Recovery Tool, meaning it isn't currently rolling over-the-air (OTA). Keep in mind that if you use the the Windows Device Recovery Tool to update your device, you'll lose all your data.

Source : Gsmarena

How to install custom recovery "TWRP" For Samsung Galaxy A7 , A7 Duos

$
0
0
Samsung Galaxy A7 Logo
Review , Price , And Full Specs
Prerequisites :

You have to backup your data first like contacts , calls , massages , apps ,
1-You have installed your A7 USB drivers on your PC (Find it here ).
2-You need to enable USB debugging mode which is deactivated by default. (you can skip it )
3-Your A7 should have 70-80% charge remaining.
4-Your A7 should be factory unlocked. (for locked phone, flash carrier firmware to stay on warranty)
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt. 
6-Make sure that kies program is not running & disable antivirus.

Downloads :


TWRP Recovery Img

Samsung Usb Drivers
Odin flash tool


Flashing 
Samsung Ace Galaxy Advance Recovery  :


1.You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2.Then you must install all driver or Samsung smart switch to your computer or PC.
3.Extraxt Odin V3.10.6. file on the destination folder.
4.Download Recovery file
5.Switch Off your A7 to start flashing process.
6.Then, you must run Odin3 v3.10.6 by right click on Odin.exe and select Run as Administrator.
7.When program is running, now you can click AP, and navigate to the Recovery file.
8.Now your Recovery file has been inserted in Odin3
9.Then, Enter download mode your 
A7
http://rooter15.blogspot.com/2016/01/download-mode-for-samsung-galaxy-a7-and.html
10.Connect your A7 to pc or laptop With usb
11.Start downloading and wait until it's says it's done

Download Mode For Samsung Galaxy J1

$
0
0
Samsung Galaxy J1 Logo
Review , Price , Full Specs
About Download Mode:

Download Mode is a state your phone can be in that allows you to flash firmware through Odin or other desktop software.
When in Download Mode, you will see a triangle with an Android image in it and it says "Downloading..."
If you are stuck on the 'Downloading..." screen, you can just remove and re-insert the battery then power the phone back on.
If you are flashing firmware while in download mode, then you unplug it or remove the battery, your phone probably won't turn on any more.
Download Mode is essentially the same as Bootloader Mode.

How To Access Download Mode for J1 :

4 Ways to do access download mode for

1-Button Combo
(Power + VOL down + Home) And In menu select continue (VOL up)
2-Reboot Application (requires root See here guide for rooting Galaxy J1)

3-USB Jig 

4-CMD/Terminal

a-Install  ADB
b-You must have USB Drivers installed for your device.
c-Enable USB Debugging on your device and plug it into your computer via USB cable.
d-Open CMD (windows) or Terminal (linux/mac). To open CMD, hold windows key, then press R, then type cmd.exe and press enter.
e-Type adb reboot download

Source : Rooter15 jakar , XDA

How to install custom recovery " TWRP" For Samsung Galaxy J1

$
0
0
Samsung Galaxy J1 Logo
Review , Price , Full Specs
Prerequisites :

You have to backup your data first like contacts , calls , massages , apps ,
1-You have installed your J1 USB drivers on your PC (Find it here ).
2-You need to enable USB debugging mode which is deactivated by default. (you can skip it )
3-Your J1 should have 70-80% charge remaining.
4-Your J1 should be factory unlocked. (for locked phone, flash carrier firmware to stay on warranty)
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt. 
6-Make sure that kies program is not running & disable antivirus.

Downloads :


TWRP Recovery Img

Samsung Usb Drivers
Odin flash tool


Flashing 
Samsung J1 Recovery  :


1.You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2.Then you must install all driver or Samsung smart switch to your computer or PC.
3.Extraxt Odin V3.10.6. file on the destination folder.
4.Download Recovery file
5.Switch Off your J1 to start flashing process.

6.Then, you must run Odin3 v3.10.6 by right click on Odin.exe and select Run as Administrator.
7.When program is running, now you can click AP, and navigate to the Recovery file.
8.Now your Recovery file has been inserted in Odin3
9.Then, Enter download mode your J1
http://rooter15.blogspot.com/2016/01/download-mode-for-samsung-galaxy-j2.html
10.Connect your J1 to pc or laptop With usb
11.Start downloading and wait until it's says it's done

Samsung Galaxy J3 Coming Very soon

$
0
0

The Samsung Galaxy J3 was announced in November, and starting today you can already pick one up from Virgin Mobile if you're in the US. Furthermore, the handset will reach Sprint's other prepaid brand, Boost Mobile, on January 18, which is next Monday. That's when you'll be able to find it in retail stores, while online availability will start on January 19.

At both prepaid carriers, the Galaxy J3 is priced at $179.99 (plus tax), obviously without any requirement of signing a long-term contract.

Source : newsroom , pocketnow , gsmarena

Android 6.0 marshmallow Samsung Galaxy S6

Samsung Galaxy S6 Edge Android 6.0 mash

Marshmallow Android 6.0 For Samsung Galaxy Edge+

Download mode for Samsung Galaxy S6 Edge

$
0
0
Samsung Galaxy S6 Edge
S6 Edge Price , Review , Full Specs
About Download Mode:

Download Mode is a state your phone can be in that allows you to flash firmware through Odin or other desktop software.
When in Download Mode, you will see a triangle with an Android image in it and it says "Downloading..."
If you are stuck on the 'Downloading..." screen, you can just remove and re-insert the battery then power the phone back on.
If you are flashing firmware while in download mode, then you unplug it or remove the battery, your phone probably won't turn on any more.
Download Mode is essentially the same as Bootloader Mode.

How To Access Download Mode for J1 :

4 Ways to do access download mode for

1-Button Combo
First of all, turn off your phone; you can either press once on power button and select “power off” or you can press and hold the power key for a few seconds.
Next, initiate the reboot sequence by pressing and holding (at the same time) the power, volume down and home buttons.
Release the keys when download mode is displayed on your Galaxy S6.
2-Reboot Application (requires root See here guide for rooting Galaxy J1)

3-USB Jig 

4-CMD/Terminal

a-Install  ADB
b-You must have USB Drivers installed for your device.
c-Enable USB Debugging on your device and plug it into your computer via USB cable.
d-Open CMD (windows) or Terminal (linux/mac). To open CMD, hold windows key, then press R, then type cmd.exe and press enter.
e-Type adb reboot download

Source : Rooter15 jakar , android.gs

How to install custom recovery "TWRP" Samsung Galaxy S6 Edge

$
0
0
Samsung Galaxy S6 Edge
S6 Edge Price , Review , Full Specs
Prerequisites :

You have to backup your data first like contacts , calls , massages , apps ,
1-You have installed your S6 Edge  USB drivers on your PC (Find it here ).
2-You need to enable USB debugging mode which is deactivated by default. (you can skip it )
3-Your S6 Edge should have 70-80% charge remaining.
4-Your S6 Edge should be factory unlocked. (for locked phone, flash carrier firmware to stay on warranty)
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt. 
6-Make sure that kies program is not running & disable antivirus.

Downloads :


TWRP Recovery Img

Samsung Usb Drivers
Odin flash tool


Flashing 
Samsung S6 Edge Recovery Via Odin Flash Tool :


1.You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2.Then you must install all driver or Samsung smart switch to your computer or PC.
3.Extraxt Odin V3.10.6. file on the destination folder.
4.Download Recovery file
5.Switch Off your S6 Edge  to start flashing process.

6.Then, you must run Odin3 v3.10.6 by right click on Odin.exe and select Run as Administrator.
7.When program is running, now you can click AP, and navigate to the Recovery file.
8.Now your Recovery file has been inserted in Odin3
9.Then, Enter download mode your S6 Edge
http://rooter15.blogspot.com/2016/01/download-mode-for-samsung-galaxy-s6-edge.html
10.Connect your S6 Edge to pc or laptop With usb
11.Start downloading and wait until it's says it's done

____________________________________________________

Flashing Samsung S6 Edge Recovery Via TWRP Apk App :

1-Download app from google play store .
2- Install and open it .
3-Follow instructions to install recovery .

Done
Viewing all 222 articles
Browse latest View live